How freight class is worked out
density = weight (lb) ÷ volume (ft³), where volume = length × width × height (in) ÷ 1,728
Example: a pallet of 48 × 40 × 48 inches is 92,160 cubic inches, or 53.3 cubic feet. At 500 lb, its density is 500 ÷ 53.3 = 9.4 lb per ft³, which is class 100. The same pallet at 1,000 lb has a density of 18.75 and moves to class 70, which costs less per pound.
What changed in July 2025
The National Motor Freight Traffic Association (NMFTA) runs the National Motor Freight Classification (NMFC). Its Docket 2025-1, in force since 19 July 2025, moved many commodities from fixed classes to density-based classes and introduced a single 13-step density scale. Under the old system many items had their own class regardless of how they were packed. Now, for most of them, a denser shipment gets a lower class.
| Density (lb per ft³) | Class |
|---|---|
| 50 or more | 50 |
| 35 to under 50 | 55 |
| 30 to under 35 | 60 |
| 22.5 to under 30 | 65 |
| 15 to under 22.5 | 70 |
| 12 to under 15 | 85 |
| 10 to under 12 | 92.5 |
| 8 to under 10 | 100 |
| 6 to under 8 | 125 |
| 4 to under 6 | 175 |
| 2 to under 4 | 250 |
| 1 to under 2 | 300 |
| Under 1 | 400 |
When density is not the whole answer
Some items still have a fixed class or a special provision in the NMFC, for example certain hazardous materials, items that are hard to handle or stack, and goods with unusual liability. The carrier bills by the NMFC item number on your bill of lading. Use this calculator to estimate and to check a quote, then confirm the item number with your carrier or broker.
Mistakes that lead to reclassification fees
- Measuring the boxes but not the pallet, or ignoring overhang. Carriers measure the whole unit at its widest points.
- Stating the product weight without the pallet and packing.
- Rounding dimensions down. Carriers round up to the next inch.
- Stacking items that cannot take weight on top. Carriers may charge for the space above them.
For parcels rather than pallets, use the dimensional weight calculator. For volume in cubic metres, see the CBM calculator.
Sources
Frequently asked questions
How do I calculate freight class?
Multiply length × width × height in inches and divide by 1,728 to get cubic feet. Divide the weight in pounds by that figure to get density, then find the class on the 13-step NMFC density scale.
What freight class is 10 pounds per cubic foot?
Class 92.5 on the 2025 scale, which covers 10 to under 12 pounds per cubic foot. Just under 10 falls in class 100.
When did the new NMFC density scale start?
On 19 July 2025, with NMFTA Docket 2025-1. It brought in a single 13-step density scale and moved many items to density-based classes.
Does a higher freight class cost more?
Yes. Higher classes are charged more per hundred pounds because the freight takes more space for its weight. Making a pallet denser, by stacking tighter or removing empty space, can lower the class.
Is this calculator's class final?
No. The class on your bill comes from the NMFC item number for your commodity. Most items now follow the density scale, but some keep their own class, so confirm with your carrier.